Standard Locker constructed with a pop riveted mild steel carcass that comes pre-drilled, ideal for nesting Lockers together. The Unit is also fitted with a single compartment Locker, with a top shelf and coat hook, two-tier Lockers are fitted with a coat hook.
Good storage capacity
Powder Coated Finish
Strengthened & ventilated doors with rubber buffers
Door Compartment Options: 1,2,3,4,5 & 6
Fire Classification EN 13501-1
The Visiplas moulded rack protectors offer a high visibility bumper, which suits many of the leading pallet racking systems.
Ideally suited for intermediate uprights with a slim profile that does not reduce the clear opening of the bay.
The unique design allows the impact to be absorbed within the protector whilst having the ability to reform after impact. Each guard is quickly installed onto the face of the upright with two cable ties (an additional cable tie is supplied for every protector for maintenance)
Tough impact resistant
High visibility yellow
Energy absorbing design
Easily fitted and removed
Certified to impact loads specified in EN15512-2009
Made from polyethylene compounded plastic
Absorbs the impact energy preventing damage to the upright
Available in several widths to suit different manufacturers’ uprights
Protectors are 500mm high and can be stacked two high (1000mm)
Simple attachment to the rack uprights with 2 cable ties.
Fast installation & easy to carry out maintenance checks
Narrow design without reducing the clear entry of the bay
High visibility yellow colour enhances position of upright location
Injection moulded from a high impact plastic compound
Distributes the collision load to an internal energy absorbing pad
Chemical resistant and suitable for use in temperatures down to -35°C
Design Registration No. 335225 and No. 335226
Reduce fatigue and slips in oil prone areas
A nitrile rubber mat for swarf prone areas. Contains nitrile to offer the best resistance to oils and chemicals. Ideal for food processing and manufacturing locations due to its excellent resistance to grease, fats and detergents. Easily cleaned in a commercial washing machine. Raised pattern surface for exceptional slip-resistance
(tested to DIN 51130).
Open holes efficiently drain liquids and capture debris. Hygienic anti-microbial properties make it suitable for food processing locations.
Contains nitrile to offer the best resistance to oils and chemicals. Ideal for food processing and manufacturing locations due to its excellent resistance to grease, fats and detergents. Easily cleaned in a commercial washing machine. Raised pattern surface for exceptional slip-resistance. Open holes efficiently drain liquids and capture debris. Hygienic anti-microbial properties make it suitable for food processing locations.
Application Temperature: -30°C to 90°C
Cleaning Method: Pressure hose
COO (Country of Origin): LK
Environmental Resistance: Suitable for kitchens and oily indoor environments
Hole Size: 12.5mm
Installation Method: Loose Lay
Manufacturing Process: Compression moulding
Max. Operating Temperature: +100°C
Min. Operating Temperature: 0°C
Product Height: 9mm
Product Weight: 7.75kg
Resistance to Chemicals: Resistant to Oil
Slip Tested to: DIN 51130 - R11
Surface Finish: Cross-grip
Tensile Strength: 5 MPa
Typical Applications: Food Manufacturing, Kitchens, General industrial, Machine tool areas where swarf is prevalent
UV Resistance: Yes
Ideal for restricting access to temporary work areas
› › Solid, cast iron base for extra strength & durability
› › Either 4.9 m or 10.6m belt length 4 way connectivity
Superior fire tested doormat for busy entrances
Hardwearing polyamide carpet surface doormat. Suitable durability for high traffic entrance areas. Fibres scrape and wipe moisture from footwear for effective floor protection. Fully fire tested.
Anti-slip vinyl backing helps maintain mat position, evenon smooth floors.
UV and temperature resistant from 0ºC to 60ºC.
Coating Thickness: 2mm
COO (Country of Origin): BE
Environmental Resistance: Suitable for indoor environments only
Fire Tested to: Flame retardant to Cfl-S1
Installation Method: Loose lay
Manufacturing Process: Tufting 5/32'
Max. Operating Temperature: +60ºC
Min. Operating Temperature: 0ºC
Product Height: 8mm
Product Weight: 3.5kg/m2
Tuft Density: 110,000/m2
Typical Applications: Entrance Areas
UV Resistance: Yes