Zinc & Plated finish available in Green, Light Grey, Blue, Yellow, Light Blue & Red.
The Visiplas moulded rack protectors offer a high visibility bumper, which suits many of the leading pallet racking systems.
Ideally suited for intermediate uprights with a slim profile that does not reduce the clear opening of the bay.
The unique design allows the impact to be absorbed within the protector whilst having the ability to reform after impact. Each guard is quickly installed onto the face of the upright with two cable ties (an additional cable tie is supplied for every protector for maintenance)
Tough impact resistant
High visibility yellow
Energy absorbing design
Easily fitted and removed
Certified to impact loads specified in EN15512-2009
Made from polyethylene compounded plastic
Absorbs the impact energy preventing damage to the upright
Available in several widths to suit different manufacturers’ uprights
Protectors are 500mm high and can be stacked two high (1000mm)
Simple attachment to the rack uprights with 2 cable ties.
Fast installation & easy to carry out maintenance checks
Narrow design without reducing the clear entry of the bay
High visibility yellow colour enhances position of upright location
Injection moulded from a high impact plastic compound
Distributes the collision load to an internal energy absorbing pad
Chemical resistant and suitable for use in temperatures down to -35°C
Design Registration No. 335225 and No. 335226
Reduce fatigue and slips in oil prone areas
A nitrile rubber mat for swarf prone areas. Contains nitrile to offer the best resistance to oils and chemicals. Ideal for food processing and manufacturing locations due to its excellent resistance to grease, fats and detergents. Easily cleaned in a commercial washing machine. Raised pattern surface for exceptional slip-resistance
(tested to DIN 51130).
Open holes efficiently drain liquids and capture debris. Hygienic anti-microbial properties make it suitable for food processing locations.
Contains nitrile to offer the best resistance to oils and chemicals. Ideal for food processing and manufacturing locations due to its excellent resistance to grease, fats and detergents. Easily cleaned in a commercial washing machine. Raised pattern surface for exceptional slip-resistance. Open holes efficiently drain liquids and capture debris. Hygienic anti-microbial properties make it suitable for food processing locations.
Application Temperature: -30°C to 90°C
Cleaning Method: Pressure hose
COO (Country of Origin): LK
Environmental Resistance: Suitable for kitchens and oily indoor environments
Hole Size: 12.5mm
Installation Method: Loose Lay
Manufacturing Process: Compression moulding
Max. Operating Temperature: +100°C
Min. Operating Temperature: 0°C
Product Height: 9mm
Product Weight: 7.75kg
Resistance to Chemicals: Resistant to Oil
Slip Tested to: DIN 51130 - R11
Surface Finish: Cross-grip
Tensile Strength: 5 MPa
Typical Applications: Food Manufacturing, Kitchens, General industrial, Machine tool areas where swarf is prevalent
UV Resistance: Yes
NHS approved Alcohol-free sanitiser that can withstand high temperatures. Suitable for use in offices, workshops, and school environments, this hand sanitiser is ideal in helping to prevent the spread of Covid-19. The sanitiser is diluted with sterile distilled water and kills 99.99% of germs and bacteria.
Heavy-duty entrance matting, ideal for office spaces and general workplaces. Raised, reinforced ‘waffle’ pattern scrapes dirt away from footwear, helping to reduce the amount of dirt/debris brought into the building. Exceptional moisture wiping properties. Able to retain up to 5.4 litres water/ m2. Lipped edges to help reduce tripping hazards and rubber backing for slip-resistance.
Backing: Natural and recycled rubber
Cleaning Method: Wash with cold water, use vacuum cleaner or use pressure pump to remove dirt.
COO (Country of Origin): IN
Environmental Resistance: Suitable for indoor environments only
Installation Method: Loose lay
Max. Operating Temperature: +130°C
Min. Operating Temperature: -20°C
Product Height: 7mm
Product Weight: 3.7kg/m2
Surface Finish: Waffle
Tensile Strength: 2.75 to 3.25 MPa
Typical Applications: Entrance areas
UV Resistance: Yes