Proper installation and maintenance of PVC strip curtains are essential for ensuring their longevity and effectiveness. This guide provides a step-by-step installation process and valuable maintenance tips, ensuring you get the most out of your strip curtains.
Step-by-Step Guide to Installation
Tools and Materials Needed
- PVC strip curtains
-
Mounting hardware (brackets, screws)
- Measuring tape
- Level
- Drill
- Screwdriver
- Pencil for marking
Installation Steps
Step One: Measure the Opening:
- Accurately measure the width and height of the doorway or opening where the strip curtains will be installed to determine the length and number of strips required.
Step Two: Prepare the Mounting Hardware:
- Using a level, mark where the mounting brackets will be placed. Drill holes for the screws, ensuring they are evenly spaced.
- Attach the mounting brackets securely to the top of the doorway, ensuring they are level and firmly fixed,
Step Three: Cut the Strips:
- Measure and cut the PVC strips to the desired length, ensuring they hang just above the floor to avoid dragging but long enough to provide an effective barrier.
- If pre-cut strips are used, confirm they are the correct length before installation.
Step Four: Attach the Strips:
- Attach the PVC strips to the mounting hardware, ensuring even spacing and the desired overlap. Most mounting kits include hooks or clips for easy attachment.
- Ensure each strip is securely attached to prevent slipping or gaps, which can reduce the effectiveness of the barrier.
Step Five:Secure and Adjust:
- Once all strips are attached, check to ensure they hang straight and provide complete coverage. Make any necessary adjustments to align the strips properly.
- Test the installation by passing through the strips to ensure they move freely and return to their original position without gaps.
Maintenance Tips
#1 Regular Cleaning:
- Clean the PVC strips regularly with mild soap and water to remove dirt, dust, and other contaminants. Avoid abrasive cleaners that could damage the PVC material.
- Consider using a PVC cleaner designed explicitly for strip curtains for heavy-duty cleaning.
#2 Inspect for Damage:
- Regularly inspect the strips for signs of wear and tear, such as cracks, splits, or discolouration. Damaged strips should be replaced promptly to maintain the effectiveness of the barrier.
#3 Lubricate Moving Parts:
- For sliding or movable installations, ensure all moving parts are lubricated to prevent sticking and ensure smooth operation. Use a silicone-based lubricant for best results.
#4Check Mounting Hardware:
- Periodically check the mounting hardware to ensure it remains secure. Tighten any loose screws or brackets to prevent the curtains from becoming dislodged.
- Inspect the hooks or clips that hold the strips in place, replacing any that show signs of wear or damage.
Benefits of Proper Installation and Maintenance
- Increased Longevity:
- Proper installation and regular maintenance significantly extend the lifespan of your PVC strip curtains, providing a better return on investment.
- Enhanced Effectiveness:
- Well-maintained strip curtains offer better insulation, pest control, and safety, creating a more efficient and secure workplace.
- Cost Savings:
- Reduced need for frequent replacements and repairs translates to cost savings over time, making proper maintenance a worthwhile investment.
- Improved Safety and Hygiene:
- Regular cleaning and inspection ensure that the strip curtains provide a hygienic barrier against contaminants and pests, maintaining a safe working environment.
Following these detailed installation and maintenance guidelines ensures that your PVC strip curtains remain effective and durable for years. Proper care and attention to detail will maximise your investment's benefits, enhancing your warehouse's safety and efficiency.
For more detailed instructions and to explore our range of products, visit the Strip Curtains Direct Installation Guide.
